Name |
Description |
Instruments/Softwares |
MICROPROCESSOR TRAINERS AND INTERFACE MODULES
|
MPS 85-3 is 8 bit 8085 based Microprocessor Trainer
with on-board keypad, seven segment display, RS-
232-C, battery backup for RAM, Windows / DOS
driver, built-in Editor, Assembler and Disassembler
Trainer |
|
EMBEDDED
DEVELOPMENT BOARD
|
The immensely popular PIC development board for the PIC16F877A enables easy development and testing of various solutions of PIC projects.
Microchip’s powerful PIC 16F877A It is used to develop the exciting PIC real-time applications.
|
|
NXP 89V51RD2
EMBEDDED
DEVELOPMENT
BOARD
|
The Embedded development board provides the stable and cost-effective platforms for building powerful embedded applications. It works on the two mode of operation (USB and Serial). It has the special features of onboard Input Output peripherals. It acts as target board for other interface boards also. It is used to learn and implement the 8051 projects in trouble free-way. |
|
WIRELESS
INTERFACE CARD
|
The wireless interface card is the low power wireless sensor networks. The Xbee modems are one of the easiest ways to create a wireless point to point or mesh network. It has on board 3.3V low drop voltage regulator and LED indicators for reception, transmission status and activity of RSSI and power indication. It is compatible to work as the modem for Embedded and FPGA development boards. |
|
SENSOR
INTERFACE CARD
|
The Sensor Interface Card has designed to study the operations of sensors such as photo diode, LDR, Thermistor, LM35 and IR sensors. All the sensors can be interfaced simultaneously through the multichannel ADC 0809. The outputs can be viewed using LED Seven segment display. This interface card is compatible to interface with Embedded, FPGA development boards through standard 40 pin GPIO connectors. |
|
ELEVATOR
INTERFACE CARD
|
The Elevator interface card is designed to demonstrate the elevator (Lift) operation of eight floors. It has the Input Output devices, which illustrates the floor selection and the selected floors can be represented by Segment display and Buzzer in the trouble-free way .It is one of the ideal design modules of elevator. |
|
ADC0809
INTERFACE CARD
|
The ADC 0809 interface board is designed to explain the analog to digital conversion using ADC 0809 chip.This interface card is compatible to interface with Embedded, FPGA development boards and sensors to be used in real time projects also. Stand alone working mode is the special feature of this card. The ADC 0809 interface card is a perfect platform for learning about the basic concepts of ADC operation. |
|
MOTOR
INTERFACE CARD
|
The Motor Interface Card has designed to study the concept of interfacing motors such as Stepper motor, DC motor and Servo motors. The board has mode selection slide switches, push button switches, segment and LCD displays. All the driving lines are isolated using opto-isolators. This interface card is compatible to interface with Embedded, FPGA development boards through standard 40 pin GPIO connector.
|
|
I2C INTERFACE
CARD
|
The I2C interface card - I has designed to interface a DS1307 Real-time Clock device and AT24C256 EEPROM using I2C protocol. The board is having 16x2 LCD to display seconds, minutes, hours, day, month and year and it also have 7 segment display to display the time. By using the push button switches one can easily edit and set the time, date and alarm. It has been designed with standard 40 pin GPIO connector to interface with different target boards.
|
|
DIGITAL I/O CARD
|
The Digital I/O card-IV has designed to interface with Embedded & FPGA development boards to practice the basic concepts of I/O operation using LED, LCD, 7 Segment Display, 4X4 keypad matrix, Relay, Buzzer and slide switch interfaces. These I/O modules offer good reliability, low-cost solution for distributed I/O applications. It has been designed with standard 40 pin GPIO connector to interface with different target boards.
|
|
TRAFFIC LIGHT
CONTROLLER
INTERFACE CARD
|
The TRAFFIC CONTROLLER card interfaces with the any Microprocessor / Microcontroller kit and is used to simulate the traffic control sequence at a junction.
|
|
STEPPER MOTOR
|
Compact size and high-output torque.
Superior running quietness and stability
|
|
ADC/DAC
INTERFACE CARDS
V2
|
Analog to Digital converter is a device that converts Analog Signal (normally voltage) into corresponding digital value. This digital value is proportional to the input Analog Signal,
|
|
KEIL UVISION V4
|
The µVision IDE combines project management, runtime environment, build facilities, source code editing, and program debugging in a single powerful environment. µVision is easy-to-use and accelerates your embedded software development. µVision supports multiple screens and allows you to create individual window layouts anywhere on the visual surface.
|
|